Globe Knot Mandrel 25 to 75mm Knot Jig

```html

Embossed Mandrels for Globe Knots

These globe knot mandrels are designed for decorative knot tying, paracord work, maritime ropework, lanyards, key fobs and ornamental cord projects.

Globe knots can be difficult to lay out freehand because the pattern wraps around a spherical shape. The embossed guides on each mandrel provide a clear path to follow, helping you keep the structure accurate while the knot is built up.

Once the knot has been tied on the mandrel, it can be removed, tightened and dressed around your chosen core or object.

How to Use the Mandrels

Start the knot on the mandrel by following the raised over-under pattern. Work around the mandrel until the knot structure is complete, then gradually remove slack and dress the knot.

For a snug finished knot, the final object or core may need to be slightly smaller than the mandrel, depending on the cord size and number of passes.

• For a 3-pass knot using 550 paracord, use a core slightly smaller than the mandrel diameter.
• For a 4-pass knot, a core close to the mandrel diameter is usually suitable.
• Final fit will vary depending on cord diameter, tension and how tightly the knot is dressed.

Key Features

• Raised embossed over-under guides on each mandrel
• Designed to reduce guesswork when tying globe knots
• Suitable for paracord, craft cord and decorative ropework
• Stacking design for compact storage
• Screws included with each jig
• Designed and 3D printed in-house

Storage and Organisation

The mandrels are designed to nest inside each other, making the full set compact and easy to store.

The 75 mm mandrel includes top and bottom screw caps. The bottom cap includes an internal compartment for storing screws securely when the set is not in use.

Mandrel Sizes and Knot Detail

• 75 mm mandrel: forms a globe knot with 96 facets
• 65 mm mandrel: forms a globe knot with 56 facets
• 50 mm mandrel: forms a globe knot with 56 facets
• 25 mm mandrel: forms a globe knot with 30 facets

The complete set offers better value than buying the mandrels individually and gives you a useful range of sizes for different globe knot projects.

Suitable For

• Globe knots
• Decorative beads
• Lanyards and key fobs
• Maritime ropework
• Paracord projects
• Learning and practising spherical knot structures

Please Note

• Cord and finished knots shown in photos are not included unless stated
• Each mandrel is 3D printed; minor layer lines or print marks are normal
• Final knot size will depend on cord diameter, number of passes and dressing tension
• The mandrels are intended for knot layout and construction, not as permanent cores

Dispatch and Returns

• Fast dispatch
• Secure packaging
• Free returns available

```